What To Do & What Not To Do When You Have Frozen Pipes In Your Home

What to do frozen pipes Water Damage Restoration Dallas

Oh no! You turned on your faucet, and only a small amount of water comes out. Do you have frozen pipes?

If you do, knowing what you should do to thaw your pipes and what might actually do more harm than good can mean the difference between a small water damage problem and a large water damage loss.

Here are some tips to help you locate the frozen pipe and how to thaw it to prevent damage to the pipe and to get water flowing again:

If you turn the faucet on in one room and think you have frozen pipes, check all the other faucets in your home. If it’s cold enough for one faucet to freeze, it’s possible that there are multiple frozen pipes that you’ll need to thaw. It’s a good idea to get an understanding of the scale of the problem before you get started.
Read more “What To Do & What Not To Do When You Have Frozen Pipes In Your Home”

Winter Maintenance Tips & How To Prevent Pipes From Freezing

Most pipe bursts occur in residential homes during the winter season

[lead]Winter brings with it a lot of unpredictability, and you never really know what you might get from year to year.[/lead] It doesn’t matter if weather experts are predicting warmer than usual weather, or if they are saying it’s going to be a long winter, there’s always going to be at least a few storms that have the potential to bring cold weather that can lead to frozen pipes.

So whether there is a deep freeze that lasts for a few days, or an ice storm that knocks out power for a few hours or more, it’s possible to experience frozen pipes. Preparation is the key to preventing frozen pipes, and now is the time to get started.

Prevention Steps to Take Now

1.) Take advantage of nice weather now to identify areas that are at risk of frozen pipes and take action. Check the insulation in your attic or crawlspace, and make sure your pipes are adequately protected. If you need to add insulation, make sure to follow all directions and wear the necessary protective equipment, especially when dealing with fiberglass insulation.

2.) You should also make sure you know where your water shutoff valve is and how to shut off water for your entire house. If you end up with a burst pipe, your definitely going to need to shut off the main water supply line quickly, and it will need to stay off until the pipe can be repaired. A temporary patch kit can be used to seal the pipe until a permanent repair can be made, but should only be used if necessary. Remember that if conditions existed to freeze the pipe once, it may happen again before repairs can be made.

3.) If you have a large unfinished area in your home, foam board can be used to temporarily insulate the area. Secure the foam boards to the framing using drywall screws. This will help keep cold air out, and will add a layer of insulation to keep the air inside warmer longer.

What to Do When it Gets Cold

When the temperatures drop and there is the potential for frozen pipes, it’s still not too late for a little prevention. Avoid the temptation to turn down the thermostat to save money and energy when it gets really cold outside, as this can cause the uninsulated areas of your home to drop below freezing and lead to frozen pipes.

A heat trace cable can be installed on pipes susceptible to freezing. Be sure to follow all directions for correct installation and use. In a pinch, a space heater can be used to keep uninsulated or poorly insulated areas above freezing to prevent frozen pipes.

At Regent Restoration, we understand that even with the best prevention, frozen pipes and the water damage that follows can and do still happen. Our water damage restoration team is on-call 24 hours a day and will respond quickly to your water damage emergency. Contact us today.

Flood Damage Cleanup Services Dallas

What’s The Difference Between Flood Damage and Water Damage?

If you have homeowners insurance you might think your home is safe, but are you confident that your home is protected against flooding and/or water damage? It’s important to know the difference between both types and whether or not you’re covered.

For starters, it’s good to know the difference between flood damage and water damage.
Read more “What’s The Difference Between Flood Damage and Water Damage?”

Creating A Disaster Preparedness Plan For Business Owners

Disaster Preparedness Plan For Business Owners Dallas

Water damage can strike anywhere, anytime. Commercial properties are at a greater risk of sustaining major water damage. Interruptions from water damage cost money and may put your business at risk of closing permanently. Preparing for both large and small-scale water damage disasters protects your livelihood and gets you back in business quickly after a disaster.

All businesses are at risk of sustaining water damage, whether from a natural disaster such as hurricanes or flooding, or from other sources of water damage like a broken pipe or leaking roof. And since many businesses are often only occupied for about eight to twelve hours a day, a small problem can easily cause a significant amount of water damage.

Despite the risks, most businesses don’t have an emergency plan in place. Establishing responsibilities and processes before a disaster happens can reduce your downtime after an emergency, and helps put your mind at ease.

Creating a Water Damage Disaster Preparedness Plan For Business’s

The weather can be unpredictable, and the severity of a storm can be an unknown until it is too late. Flash flooding can happen at a minute’s notice, and storm damage to the roof or windows can allow water into an otherwise secure building.

Whatever the reason, water damage can derail your business. Creating an emergency disaster preparedness plan can help your business prepare for a disaster, minimizing the impact on your business and your employees.

1. Establish Roles and Responsibilities

When disaster strikes, it’s essential that you and your employees know who has the authority to make decisions related to your business. At least one other person should have the authority to call a water damage restoration company during an emergency situation. The sooner the call is made, the sooner someone will be able to provide help.

2. Plan for Communication During and After a Water Damage Emergency

Have a plan in place to notify employees of the current situation, needs, and the plans moving forward. You can do this by using a phone tree, email, or other reliable means of communication. Make sure your employees know where to go to receive information in an emergency. You will also need a team to communicate with vendors and suppliers, as well as any branches or outside offices.

3. Partner with a Water Damage Restoration Company

Take some time before an emergency strikes to identify a water damage restoration company in Dallas that has experience with your type of business or building, and who has the resources available to perform water damage cleanup quickly and effectively.

Dallas water restoration company
We can restore and protect your business assets.

Regent Restoration provides emergency water damage restoration services to businesses and commercial properties in Dallas and the surrounding communities. Contact us today to learn how we can help in a water damage emergency.

Let’s Review

  • Commercial Properties are often vacant for extended hours
  • Chances are water damage will occur when no one is in the building
  • Create an emergency water damage plan
  • Have a plan in place in case of an emergency situation
  • Partnering with a Water Damage Restoration Company speeds up response time
  • The sooner you contact Regent, the sooner the situation is handled

How To Spot Hidden Signs of Water Damage in Your Dallas Home

Hidden water damage occurs when an undetected leak damages walls, floors, and other building materials in your home. These water leaks are often slow and difficult to detect, but over time can lead to significant water damage to your Dallas home.

Where and How To Spot Signs of Water Damage

So what can you do to spot and stop leaks before they lead to water damage? It is possible and requires only a few minutes of your time. Check these common locations for water damage on a regular basis, or when you think you may have a water leak. And when you spot water damage—don’t ignore it! Call a water damage restoration company.

Check For Signs of Water Damage Under the Sink

One of the most common areas for water leaks in the home is under the sink. While it’s common to see water spots under the sink, it is certainly not normal. Check under the sink on a frequent basis to spot any standing water, water stains, or condensation. Keeping the areas under your sinks organized will help you spot problems sooner.

Let water run down your drain and check your pipes and seals for small leaks. Never ignore small or slow leaks under your sink, as small leaks can lead to big problems. Leaks will not fix themselves, and will almost always get worse.

Check the Walls for Signs of Water Damage

Signs of Water Damage is Paint Peel & Water Stains

Pipes in your home are hidden in your walls, and when there is a small leak it may be difficult to detect. Over time, water damage tucked behind walls will make itself evident through staining or soft spots in the drywall.

A little bit of prevention can help water from entering your walls in your bathroom. Make sure to caulk around the bathtub and repair any broken tile or damaged grout. And if you have wet drywall, make sure it is properly dried or replaced to prevent mold growth.

Spot Mold and Mildew Growth

Mold is a Sign of Water Damage

Water is often the last piece of the puzzle needed for mold growth to occur in our Dallas homes. Visible mold growth or a musty smell in an area where you suspect potential water damage is often an indicator that there is a problem somewhere in the area. Unexplained mold growth should never be ignored, nor should a strong musty odor that is also indicative of mold growth.

If you suspect a water leak but can’t find a source, you may be able to check your water meter to confirm a loss of water. Your water utility company will have more information for you about how you can check and test your system.

Water Damage Restoration in Dallas

Regent Restoration provides emergency water damage cleanup in the Dallas and Ft. Worth areas. Whether you have a small leak that has caused hidden water damage over time, or you experience a water damage emergency, you can trust our professional water damage technicians to respond quickly and deliver professional service in your time of need. Contact us today!

  • Water damage is not always obvious
  • Check areas common for water leaks
  • Walls can often hide water damage
  • Mold and mildew grow quickly when water is present
  • Contact your water company if you suspect a leak
  • Regent Restoration can help clean up water in your home

Water Damage Cost Dallas Fort Worth

What’s The Average Cost of Water Damage Repair in Dallas?

It is no secret that people are often clueless about water restoration Dallas and the cost of water damage repair. Water damage doesn’t happen on a daily basis (thankfully!) It usually happens when there is something wrong with your house or something in it, so hopefully that is not a usual occurrence for you.

Certain cities can experience different amounts of water damage. Dallas is no exception, especially with Texas’s fickle weather, not to mention being in the North Texas region means it is still part of tornado alley. So for Dallas, there are ample opportunities for invasive water damage.
Read more “What’s The Average Cost of Water Damage Repair in Dallas?”

How To Thaw Frozen Pipes in Your Dallas Home

How To Thaw Frozen Pipes Dallas Fort Worth Home

Even if you have taken all the necessary steps to prevent your pipes from freezing, sometimes the unexpected happens. Maybe a major storm knocked out power for several hours, causing the temperature in your home to drop and your pipes to freeze. Or maybe you left home for a few days, making sure to set your thermostat to a reasonable temperature to prevent freezing, and your furnace malfunctioned and did not heat your home properly.

Whatever the reason, frozen pipes should be a major concern, as this can cause physical damage your pipes and require repairs, and also because they can lead to some serious water damage in your home. Whenever you have frozen pipes, you should get to work to thaw the pipes as soon as possible to prevent damage to both the pipe and your home.

Water Drying on Hardwood Floor from Pipe Freeze Dallas

Here’s how to thaw frozen pipes yourself:

Open The Faucets

Remember to first open the faucet on the frozen pipe to allow any steam or water to escape to prevent further damage to the pipe as you heat the pipe and melt the ice inside. If you can’t thaw the pipe yourself or you cant access the location of the frozen pipe, you should call a licensed plumber to help.

Use Electrical Heat Tape

This specially designed electric heat tape is used to wrap around the pipe to slowly thaw the pipe. Make sure to use heat tape certified by a national testing laboratory, and follow all directions carefully. Never double-wrap the tape as this can cause overheating and lead to a fire.

Soak With Hot Water

This method only works if you have running water and the ability to heat water. Essentially, you should wrap the frozen pipe with several towels or cloths and pour hot water over the material. After the water cools, you’ll want to repeat the process several times until the pipe is thawed. This is a method that just about anyone can use on short notice.

Use Direct Heat

Water Drying in Bedroom from Pipe Freeze DFW

Applying direct heat to the frozen pipe can help encourage thawing. Using a heat lamp, electric hair dryer, space heater, or other direct heating source, direct the heat onto the pipe. Only use electrical means when it is safe to do so, and when the ground is dry.

For extra protection, plug the appliance into a GFCI protected outlet. Do not use anything with an open flame including a blowtorch or propane or kerosene heater, and don’t use direct heat if the water pipe is near a gas line.

With any of these methods, it’s important to keep an eye on the frozen pipe for any signs of leaking or damage to the pipe that can lead to water damage once the blockage is gone.

The expansion that occurs when water turns to ice can cause pipes to rupture, or can damage seams or seals nearby. If you do experience water damage resulting from a broken pipe, call Regent Restoration at (214) 731-4624.

 

More Information on How to Thaw Frozen Pipes:

Using An Infrared Camera To Detect Water Damage In Your Home

we use Infrared Cameras Detect Water Damage

Finding and identifying the source of water damage can be a bit tricky. Water always travels the path of least resistance, which means water coming from an upstairs bathroom might show up along a wall in your living room. Or perhaps there is a roof leak, and water is entering your ceiling and traveling to the lowest point, often a light fixture or pooling in an area near the wall.

Thermal imaging using infrared cameras helps detect damp spots in floors, ceilings or walls. It also helps restoration professionals track down the source of the water, making it easier to solve water damage mysteries. Infrared cameras are a powerful tool that spots hidden water damage before extensive damage occurs.

How Does it Work?

Infrared cameras show temperature differentials and thermal patterns. The rainbow colored images can help identify cold spots due to drafts or uneven insulation, but can also help to spot moisture as well. Because evaporative moisture cools the surface of nearby materials, water spots are often seen as dark blue spots on an IR camera.

Moisture trapped near the roof can sometimes show as a warm spot, as heat from the roof causes the temperature of the water to rise. Because there are many variables involved, only a skilled technician should use and interpret the thermal images from an IR camera.

When Should IR Cameras Be Used?

We use IR cameras to detect moisture issues before physical damage or mold is evident. They can also determine the extent of damage by locating moisture pockets in drywall, ceilings, flooring, and other building materials. We then track the moisture back to the source of the water. An IR camera is an effective tool for finding areas of water damage quickly without demolishing the property.

While IR cameras are useful for locating hidden pockets of moisture in your home, it is just one of many tools a water damage restoration professional can use. Moisture meters should be used in combination with IR cameras to confirm the presence of water.

Benefits of Using an IR Camera to Locate Water Damage

IR cameras do not detect moisture, they do, however, measure temperate differentials that may be the result of water damage. Using an IR camera helps speed up the restoration process and reduce your losses.

We use infrared to check for signs of water damage
Infrared thermovision image showing moisture in the house from water damage

After water damage, an IR camera identifies all the affected areas. This allows cleanup and restoration efforts to be more precise. This means the cleanup and drying process can begin sooner, reducing the possibility for mold growth. Generally, the faster cleanup and restoration occurs, the lesser the damages.

Thermal imaging is just one way the professional team at Regent Restoration locates water damage in your home. If you suspect you have a water damage problem in your home, contact us today.

More Information on How Infrared Cameras Detect Water Damage:

Emerson From Flower Mound Has A Fish Tank Leak

 

Customer had water damage from his aquarium pump in Flower Mound, TX
Customer had water damage from his aquarium pump in Flower Mound, TX

Water Damage Can Happen When You Least Expect It

Flooding can happen when and where you would least expect it. Emerson from Flower Mound had a leak in his aquarium pump that led to water damage. His carpet was totally soaked. We came in and used our fans & dehumidifiers to dry out and save his carpet.